Peel & Stick Weather Seal
💨 Seal The Gaps.
Feel More Comfortable.
A flexible adhesive sealing strip that helps reduce
drafts, dust, water splashes and small insects
around everyday doors, windows and glass edges.
Helps cover gaps that allow unwanted outdoor air to enter the room.
Useful around shower doors and other edges where water can escape.
Trim the flexible strip to match doors, windows, cabinets and glass panels.
A slim appearance helps the strip blend into everyday frames and surfaces.
🏠 Less Draft • Less Dust • Easy Peel-And-Stick Installation
SMALL GAPS · EVERYDAY DISCOMFORT
🚪 Small Openings Can Let More In Than You Think
Gaps around doors and windows may allow outside air,
dust, noise, moisture and small debris to move into your space.
Instead of complicated repairs, add a flexible strip
along the problem area to help create
a closer everyday seal.
💨
Drafts
Help reduce airflow through common door and window gaps.
🌫️
Dust & Debris
Add another barrier along exposed edges and openings.
💧
Water Splashes
Useful around shower doors and moisture-prone edges.
🔊
Open-Gap Noise
A closer seal may help soften sound passing through open gaps.
SIMPLE HOME UPGRADE
✅ Peel, Stick & Seal
✓
No Drilling Required
Apply to a clean, smooth and dry surface using the adhesive backing.
✓
Flexible & Easy To Cut
Trim to the required length for different sealing projects.
✓
Multiple Width Options
Choose 25mm, 35mm or 45mm depending on the gap you need to cover.
FIND YOUR BEST FIT
📏 Which Width Should I Choose?
Measure the widest part of the gap you want to cover,
then choose a strip width that provides enough overlap.
📏 QUICK SIZE GUIDE
Match The Strip To Your Gap
Measure first. Choosing enough width helps create
better coverage around the opening.
① Measure
Check the widest part of the gap.
② Match
Compare your gap with the ranges below.
③ Install
Cut to length, peel and press into place.
25mm
Approx. 0.98" Wide
Recommended Gap
1–15mm
0.04"–0.59"
Best for smaller gaps and narrow edges.
★ MEDIUM GAPS
35mm
Approx. 1.38" Wide
Recommended Gap
1–20mm
0.04"–0.79"
Wider coverage for medium-size gaps.
45mm
Approx. 1.77" Wide
Recommended Gap
1–30mm
0.04"–1.18"
Best for larger gaps that need extra coverage.
💡 Tip:
Measure the widest point of the gap rather than only
measuring the narrowest section.
✂️ All widths can be trimmed to the length you need.
GENEROUS ROLL LENGTH
📐 16.4FT / 5M Long
A long roll gives you flexibility for one larger project
or several smaller sealing areas around your home.
ONE STRIP · MANY PLACES
🏠 Use It Around Your Home
🚪
Doors
Entry doors, bedroom doors, balcony doors and sliding doors.
🪟
Windows
Sliding windows, balcony windows and frame edges.
🚿
Shower Glass
Helps reduce water escaping through exposed glass edges.
🗄️
Cabinets
Useful around cabinet, drawer and interior-panel gaps.
PRACTICAL WITHOUT THE BULK
✨ A Slim Look That Blends In
The low-profile design helps preserve the appearance
of doors, windows, glass and surrounding surfaces
instead of creating a bulky repair look.
SIMPLE PEEL-AND-STICK INSTALLATION
✅ Measure. Cut. Peel. Press.
1
Measure
Measure the gap and required strip length.
2
Clean
Remove dust, grease and moisture.
3
Cut & Peel
Trim to length and remove the backing.
4
Press
Align carefully and press firmly in place.
PRODUCT DETAILS
📋 Choose The Width That Fits Your Project
Product Type
Self-Adhesive Weather Seal Strip
Length
Approx. 16.4FT / 5M
Width Options
25mm / 35mm / 45mm
Width In Inches
Approx. 0.98" / 1.38" / 1.77"
Installation
Peel-And-Stick Adhesive
Design
Flexible · Cut-To-Fit · Low Profile
Recommended Areas
Doors, Windows, Sliding Frames, Shower Glass, Cabinets & Interior Panels
Installation Note:
For best adhesion, apply to a smooth, clean and dry surface.
Performance can vary depending on gap size, surface material,
temperature and installation quality.
❓ Frequently Asked Questions
Which width should I choose?
Measure the widest part of the gap. As a general guide,
25mm is intended for smaller gaps, 35mm for medium gaps,
and 45mm for larger areas requiring more coverage.
Can I cut the strip?
Yes. The strip can be trimmed to the length required
for your installation area.
Does installation require drilling?
No. It uses an adhesive backing and is designed
for peel-and-stick installation.
Can I use it around shower doors?
It can be used on suitable smooth surfaces around shower glass
and similar edges to help reduce water escaping through gaps.
Can it help with drafts?
It is designed to help cover open gaps around doors and windows,
which can reduce unwanted airflow through those openings.
How should I prepare the surface?
Clean away dust, oil and moisture, then allow the surface
to dry completely before applying the adhesive strip.
🏠 A Small Fix For Everyday Gaps
Measure the gap, choose the right width, cut to fit
and add a cleaner seal around doors, windows,
shower glass and more.
💨 Draft Control •
✂️ Cut To Fit •
✅ Peel & Stick
